7.9: Introduction to Beneficial Prokaryotes - Biology

7.9: Introduction to Beneficial Prokaryotes - Biology

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Identify common prokaryotes that are beneficial to humans

Not all prokaryotes are pathogenic. Just think about the role of prokaryotes in biogeochemical cycles.

What You’ll Learn to Do

  • Explain the need for nitrogen fixation and how it is accomplished
  • Identify foods in which prokaryotes are used in the processing
  • Describe the use of prokaryotes in bioremediation
  • Describe the beneficial effects of bacteria that colonize our skin and digestive tracts

Learning Activities

The learning activities for this section include the following:

  • Nitrogen Fixation
  • Food from Bacteria
  • Bioremediation
  • Microbes and the Human Body
  • Self Check: Beneficial Prokaryotes


NCBI Bookshelf. A service of the National Library of Medicine, National Institutes of Health.

Griffiths AJF, Miller JH, Suzuki DT, et al. An Introduction to Genetic Analysis. 7th edition. New York: W. H. Freeman 2000.

  • By agreement with the publisher, this book is accessible by the search feature, but cannot be browsed.

Names and Functions of Friendly Bacteria

The helpful bacteria are called “probiotics”, and the other bacteria that help the probiotics to function well are called “prebiotics”. The human body system fights the diseases through the skin layer, immune system, mucous lining, and finally through the “gut microflora” (colonies of useful bacteria present in the intestine).

Probiotics help in the synthesis of vitamin K, which is required for clotting of blood. They also help in the absorption of magnesium. They produce antibiotics that help fight pathogenic bacteria and other microorganisms. The intestinal flora play an important role in the formation of new cells for the regeneration of the intestinal tract by fermenting dietary fiber, and by producing fatty acids. These microbes also produce some vitamins that are essential for the body. They are responsible for the overall digestive health. They break down the complex components of the ingested food, and thus facilitate absorption of nutrients in the blood.

Lactobacillus acidophilus

These are the most friendly bacteria. Lactobacillus is the genus name and acidophilus is the particular strain. They are naturally present in dairy products, and are added to miso, tempeh, yogurt, and other dietary supplements for better results. They produce vitamin K, lactate, and hydrogen peroxide. In the human body, they are found in the oral cavity, intestine, vagina, etc. These areas have slightly acidic pH because of these microbes. This helps curb the overgrowth of pathogens. In the vagina, these bacteria produce lactic acid that prevents fungal growth. They are used to treat diarrhea too. Thus, the microorganisms help strengthen the immune system.

Tobacillus acidophilus

They belong to the genus Lactobacillus and are acid-loving bacteria. These are found in buttermilk, yogurt, sour cream, and frozen desserts. They convert sugar and carbohydrates into lactic acid, and hence are called “lactic acid bacteria.” By lowering the pH and reducing the risk of growth of other organisms in the food through this process, they generate a fermented taste. This process is beneficial for people, as it prevents gastrointestinal infections. Anaerobes, that do not need oxygen to live, are helpful in the fermentation of vinegar, and also in the cheese-making process.

Lactobacillus reuteri

Would you like to write for us? Well, we're looking for good writers who want to spread the word. Get in touch with us and we'll talk.

These are found in breast milk and gut flora. Milk products like yogurt and cheese are fortified with these.

Acidophilus bifidus

They produce lactic acid and hydrogen peroxide. They help curb the growth of pathogens. Some lactic acid bacteria help reduce cholesterol levels by breaking down bile, thus restricting its reabsorption. They prevent the growth of hostile yeasts like Candida albicans. They cleanse the bloodstream by removing toxins and boost the immune system. While killing pathogens, antibiotics also kill helpful bacteria. Consumption of Bifidobacterium when on antibiotics can minimize the risk.

Escherichia coli

They are present in the intestine, and are also known as enteric bacteria. Probiotic Escherichia coli Nissle 1917 is used to treat bowel diseases like ulcerative colitis, Crohn’s disease, chronic constipation, irritable bowel syndrome, etc.

Streptococcus thermophilus

They are required for cheese making process. They are sometimes used to produce pasteurized milk.

Streptococcus faecium

Both Streptococcus thermophilus and Streptococcus faecium help prevent diarrhea. They are also used to treat diarrhea. They help maintain the health of the digestive system. They help alleviate symptoms of nasal cavity infections, irritable bowel syndrome, and baby colic. They even help manage symptoms of AIDS.

Bacteria that are Beneficial for Water, Soil, and Plants

» In water, some bacteria help in dissolving organic sludge. They break down the growth of algae and reduce noxious odors, thus, enhancing the growth of fish.
» They help purify water at sewage treatment plants.
» In the soil, bacteria like Streptomyces spp. help break down the organic fertilizers into nutrients, which can be easily absorbed by the plants.
» Production of vaccines requires dead or weakened bacteria.
» Some of the microbes can convert nitrogen into nitrates so that plants can easily absorb them. Rhizobium (soil bacteria) plays an important role in nitrogen fixation.
» Cyanobacteria/Cyanophyta help fix nitrogen in aquatic habitats.
» Some other beneficial plant bacteria break down the woody and tough tissues of jute, coconut, hemp, and flax.
» These microorganisms are also used in some biological pest control methods in place of pesticides.
» They are also important in the production of pure chemicals, which are utilized in agriculture or pharmaceutical industries.
» Scientists say that nearly fifty percent of the oxygen that is present in the atmosphere is produced by bacteria.

Probiotics are available in the form of capsules, powders, or liquids. The supplements are quite popular. The names of these branded medicines or food supplements are easier to remember than the beneficial bacteria names. But natural intake of these bacteria through buttermilk, yogurt, miso, etc., is always recommended.

Related Posts

Mutation, a change in the sequence of genes, is divided into various types such as beneficial, harmful, and neutral, based on their effects. We are here to discuss beneficial mutation&hellip

It is a preconceived notion that bacteria are always harmful to the human body. This is not true, as there exist bacteria that help in facilitating a healthy system in&hellip

Gram-negative bacteria refers to a broad category of bacteria that are unable to retain the crystal violet dye owing to their distinct cell wall structure. Know more about such bacteria&hellip

7.9: Introduction to Beneficial Prokaryotes - Biology

Bacteria are tiny little organisms that are everywhere around us. We can't see them without a microscope because they are so small, but they are in the air, on our skin, in our bodies, in the ground, and all throughout nature.

Bacteria are single-celled microorganisms. Their cell structure is unique in that they don't have a nucleus and most bacteria have cell walls similar to plant cells. They come in all sorts of shapes including rods, spirals, and spheres. Some bacteria can "swim" around using long tails called flagella. Others just hang out or glide along.

Are bacteria dangerous?

Most bacteria aren't dangerous, but some are and can make us sick. These bacteria are called pathogens. Pathogens can cause diseases in animals and plants. Some examples of pathogens are leprosy, food poisoning, pneumonia, tetanus, and typhoid fever.

Fortunately, we have antibiotics we can take which help to fight off the bad pathogens. We also have antiseptics to help us keep wounds clean of bacteria and antibiotic soap we use to wash to help keep off bad pathogens. Remember to wash your hands!

Not at all. Actually most bacteria are very helpful to us. They play an important role in the planet's ecosystem as well as in human survival.

Bacteria work hard in the soil for us. One type of bacteria, called decomposers, break down material from dead plants and animals. This might sound kind of gross, but it's an important function that helps to create soil and get rid of dead tissue. Another type of bacteria in the soil is Rhizobium bacteria. Rhizobium bacteria helps to fertilize the soil with nitrogen for plants to use when growing.

Yep, there's bacteria in our food. Yuck! Well, they aren't really that bad and bacteria is used when making foods like yogurt, cheese, pickles, and soy sauce.

Bacteria in our bodies

There are many good bacteria in our bodies. A primary use of bacteria is to help us digest and breakdown our food. Some bacteria can also help assist our immune system in protecting us from certain organisms that can make us sick.

Ap Biology Unit 6 Objectives

- Genetic information is transmitted from one generation to the next through DNA or RNA—
a. Genetic information is stored in and passed to subsequent generations through DNA molecules and, in some cases,
RNA molecules.
b. Prokaryotic organisms typically have circular chromosomes, while eukaryotic organisms typically have multiple linear chromosomes.

- Genetic information flows from a sequence of nucleotides in DNA to a sequence of bases in an mRNA molecule to a sequence of amino acids in a protein.

- RNA polymerases use a single template strand of DNA to direct the inclusion of bases in the newly formed RNA molecule. This process is known as transcription.

- The DNA strand acting as the template strand is also referred to as the noncoding strand, minus strand, or antisense strand. Selection
of which DNA strand serves as the template strand depends on the gene being transcribed.

- The enzyme RNA polymerase synthesizes mRNA molecules in the 5' to 3' direction by reading the template DNA strand in the 3' to 5' direction.

- In prokaryotic organisms, translation of the mRNA molecule occurs while it is being transcribed.

- Translation involves energy and many sequential steps, including initiation, elongation, and termination.

- The salient features of translation include—
a. Translation is initiated when the rRNA in the ribosome interacts with the mRNA at the start codon.
b. The sequence of nucleotides on the mRNA is read in triplets called codons.
c. Each codon encodes a specific amino acid, which can be deduced by using a genetic code chart. Many amino acids are encoded by more than one codon.
d. Nearly all living organisms use the same genetic code, which is evidence for the common ancestry of all living organisms.
e. tRNA brings the correct amino acid to the correct place specified by the codon on the mRNA.
f. The amino acid is transferred to the growing polypeptide chain.
g. The process continues along the mRNA until a stop codon is reached.
h. The process terminates by release of the newly synthesized polypeptide/protein.

The zoo beneath our feet: We’re only beginning to understand soil’s hidden world

(Jon Hughes for The Washington Post)

The gardener has a long, touchy-feely relationship with the soil. As every good cultivator knows, you assess the earth by holding it. Is it dark and crumbly, is there an earthworm or beetle in there, is it moist, and when you smell it, are you getting that pleasant earthy aroma?

All these signs are reassuring, and have been through the ages, but they are mere indicators of something much greater and infinitely mysterious: a hidden universe beneath our feet.

This cosmos is only now revealing itself as a result of scientific discoveries based on better microscopic imaging and DNA analysis. There is much still to learn, but it boils down to this: Plants nurture a whole world of creatures in the soil that in return feed and protect the plants, including and especially trees. It is a subterranean community that includes worms, insects, mites, other arthropods you’ve never heard of, amoebas, and fellow protozoa. The dominant organisms are bacteria and fungi. All these players work together, sometimes by eating one another.

The awareness of this biosphere should change the way gardeners think about cultivating plants and heighten everyone’s understanding of the natural world. In other words, don’t ever call it “dirt” again.

Nematodes convert nitrogen into a form that plants can use. (Jon Hughes for The Washington Post)

The sheer vitality of it is mind-bending: A teaspoon of good loam may contain a billion bacteria, yards of fungal strands, several thousand protozoas and a few dozen nematodes, according to Jeff Lowenfels, a garden writer based in Anchorage and co-author of “Teaming With Microbes.”

This is, basically, how it works: Plants manufacture carbohydrates through photosynthesis, but not just for themselves. They release some of their carbon sugars into the soil, which causes the bacteria and fungi to show up to feed. The bacteria crowd around the root zone, and the fungi form vast networks of interlocking strands that often link one plant to another. The bacteria convert nitrogen and other nutrients into forms the plants can use, often by getting devoured by other microbes.

The fungal strands, the mycelium, effectively increase the root mass of its host plant by as much as a thousand times and transport a bevy of goodies to the host plants, including phosphorus, copper, calcium and zinc. There is also evidence that trees use this network to send signals to one another if, say, leaf-eating pests have arrived.

In his Ted Talk, mycologist Paul Stamets referred to mycelium as “Earth’s natural Internet.”

Although some plant (and human) diseases are caused by soil-borne fungi and bacteria, most of these microbes are beneficial and keep the bad ones in check. The organisms assist in other ways, by increasing the size of soil particles, which improves the ability of the soil to hold water and air.

Even in the middle of a city, the subterranean world is thriving.

Scientists took almost 600 soil samples from across New York’s Central Park and discovered a surprising diversity and richness. They identified more than 120,000 types of bacteria and more than 40,000 species of fungi, protozoa and arthropods.

Fungi break down organic matter, which is why you will see mycelium strands in compost piles and under leaf litter. (Jon Hughes for The Washington Post)

Among the unexpected findings: The microbial species were the same, more or less, as those found in parts of the world with dramatically different flora and climates from New York’s, including Antarctic cold deserts, tropical forests and grasslands.

There was a strong association between the diverse organisms in each sample. “Unravelling these relationships will be critical to building a more integrated understanding of below-ground ecology,” the researchers wrote in a paper published by the journal for the British Royal Society. “Our work highlights that most of the diversity found in soil remains undescribed.”

Enough is known, however, to create a 21st-century subset of farming known as regenerative agriculture. The farmers have discovered that if you foster this biosphere, you don’t need expensive fertilizers because the microbes repay the plants with nutrients. They also, for obvious reasons, avoid pesticides that would kill this soil life.

The farmers do as little soil digging as possible because traditional tillage destroys the fungal networks and the desirable soil structure. Cover crops keep the soil life happy between growing seasons.

Advocates of this low-impact farming say it can restore soil carbon lost by the historic conversion of forest and prairie to farmland and help to mitigate greenhouse gases. In the 1990s, an Agricultural Research Service scientist in Beltsville, Sara F. Wright, discovered a sticky coating to fungal threads named glomalin that, it turns out, is a major reservoir for carbon.

Lowenfels says it’s also time for gardeners to adopt practices that nurture the soil biosphere. To say he thinks deeply about this subterranean world is an understatement. In addition to “Teaming With Microbes,” he has written “Teaming With Nutrients.” His latest title is “Teaming With Fungi,” which dwells on the type of fungi that directly associate with plant roots. They are known as mycorrhizal fungi, and he’s a big fan of adding them to his plants when they are installed, either as a spray or in powdered form available from the garden center. “It works. My tomato plants are bigger than the control, they’ve got more fruit on them, the plants are so healthy,” he told me. “My carrots are unbelievable this year.”

Some gardeners turn to compost tea to build soil microbes. This is made by aerating sugars, compost and humic acids in non-chlorinated water and then spraying the brew on plants and soil. Others are not convinced that this is needed, though everyone agrees that the way to foster the soil food web is to top-dress growing beds and lawns with organic matter such as shredded leaves or finished compost.

James Nardi, a biologist at the University of Illinois in Urbana, offers this advice: “Work with your fellow non-human gardeners. I never use synthetic fertilizers, and I never use pesticides.” Nardi’s 2007 book, “Life in the Soil,” remains an excellent introduction to the subject.

In the fall, he mixes horse manure with fallen leaves, shreds the mixture and applies it as a mulch to his growing beds. “In the spring, I have this lovely, spongy soil,” he said. Lowenfels shreds autumn leaves on his lawn and lets the biosphere use them over the winter.

The organic gardener’s mantra has never seemed more appropriate. Feed the soil, not the plant.

● Earthworms: Earthworms (and other worms) play an important role in the hidden biosphere. Most worm species in the garden were imported by Old World settlers, and some worms in certain regions have caused a problem by processing organic matter too efficiently. The latest culprit is a creature called the Japanese crazy worm (Amynthas agrestis), which multiplies like, er, crazy and damages the soil structure through mass feeding. It is long established in parts of the Southeast but has spread recently to Wisconsin and Illinois, where it is causing problems.

But the European earthworms familiar to most gardeners are helpful.

Worms provide critical assistance to smaller organisms by breaking down and incorporating leaves into the soil, so all may eat. Worm castings are rich in nutrients, including calcium, nitrogen, phosphorus and potassium.

The most famous observer of earthworms, Charles Darwin, estimated that they could add as much as 40 tons of casts per acre annually.

● Insects: Thousands of insects (and spiders) live in a patch of soil. Some are considered pests by humans — Japanese beetle grubs, termites and weevils, for example — but others are beloved or at least beguiling and include the larvae of lightning bugs and cicadas. Dung beetles convert animal waste into humus, a service we take for granted. Ants are the most abundant soil insect. Although some species are pests or nurture pests such as aphids, ants with their highly organized colonies are essential members of the soil biosphere. They assist in the conversion of litter to humus, move and mix large quantities of soil, and spread the seed of bulbs and other desirable plants.

● Other arthropods: The more conspicuous of these include millipedes and centipedes, as well as woodlice. Millipedes feed on plant debris and microbes centipedes eat other arthropods. Woodlice, or sowbugs, are crustaceans that like soft plant debris and make quick work of green plant material and newly fallen leaves.

One of the most abundant, but barely visible, arthropods in the soil are springtails. They are named for a tail-like structure that allows them to jump when threatened. As many as a billion or more can live in an acre of soil. Depending on species, they cycle plant debris or feed on fungi, algae or other springtails.

Mites are generally regarded by gardeners as pests, and some are — sucking sap from plants and spreading disease. But the soil houses an immense community of non-pest species that are essential to the cycle of life. Half the known species of mites live in the soil, where they feed on decaying plant litter. Nardi writes that they “set the stage for smaller decomposers like bacteria and fungi to free most of the energy and nutrients stored in those leaves.”

Some mites are predatory and attack nematodes and other small creatures.

● Nematodes: Nematodes are tiny wormlike creatures that have traditionally been viewed in agriculture as serious pests that harm plants by feeding on their roots. More recently, the view of nematodes has become more nuanced because some species are now commonly used (and purchased) as predators of garden pests such as slugs, vine weevils and white grubs, to name a few. In truth, the world of nematodes is much greater and can only be imagined. Experts believe there may be close to a million species, of which only a fraction have been described scientifically.

Some nematodes eat soil bacteria and fungi, while others prefer to consume other soil arthropods and protozoa. Their value to the garden is in converting nitrogen into a form that plants can use.

● Protozoa: Protozoa are microscopic creatures that live in vast numbers in the film of water between soil particles. The most well known is the amoeba, but these microbes come in several forms, including species that move with a single flagellum or with hairlike cilia.

They are the major predator of bacteria, and in consuming them they release nitrogen and other nutrients to plants.

Protozoa, in turn, are eaten by nematodes and other small arthropods.

● Bacteria: Historically, bacteria have been associated with germs. Some of the nastiest human diseases — anthrax, typhoid, tuberculosis and syphilis, for example — are the result of bacterial infections. But we have come to know too that our guts are full of beneficial bacteria and essential to our health.

The soil is the same way — the bad actors are outnumbered and usually outwitted by the good ones. Healthy soil is loaded with bacteria, and because they’re not very mobile, they tend to hang out in vast numbers on and around the roots of plants, a zone known as the rhizosphere. There can be as much as 100 times more bacteria around plant roots than elsewhere in the soil, and with good reason. The plants feed them carbon sugars. The microbes give back nitrogen.

● Fungi: Fungi break down organic matter, which is why you will see mycelium strands in compost piles and under leaf litter. Two basic forms of fungi form a symbiotic relationship with plants. One exists in proximity to root tips and associates with hardwood trees and conifers. The other penetrates the cell wall of the roots and is found in plants of the domestic landscape — flowers, shrubs, grasses and vegetables.

The fungi grow tiny, fragile strands called hyphae. They are a tenth the thickness of human hair, but there are so many of them that they form a vast network, effectively extending the reach and efficiency of plant roots. In her book “The Soil Will Save Us,” science writer Kristin Ohlson says there can be as much as 320 miles of hyphae in a cubic foot of soil. At least 80 percent of the plants on Earth connect to these fungal partners.

“Gardeners need to know this stuff,” Lowenfels said. “A thinking gardener is a better gardener.”

Introduction to the CRISPR/Cas9 system

Although recently developed programmable editing tools, such as zinc finger nucleases and transcription activator-like effector nucleases, have significantly improved the capacity for precise genome modification, these techniques have limitations. CRISPR (clustered regularly interspaced short palindromic repeats)/Cas9 technology represents a significant improvement over these other next-generation genome editing tools, reaching a new level of targeting, efficiency, and ease of use. The CRISPR/Cas9 system allows for site-specific genomic targeting in virtually any organism.

The type II CRISPR/Cas system is a prokaryotic adaptive immune response system that uses noncoding RNAs to guide the Cas9 nuclease to induce site-specific DNA cleavage. This DNA damage is repaired by cellular DNA repair mechanisms, either via the non-homologous end joining DNA repair pathway (NHEJ) or the homology-directed repair (HDR) pathway.

The CRISPR/Cas9 system has been harnessed to create a simple, RNA-programmable method to mediate genome editing in mammalian cells, and can be used to generate gene knockouts (via insertion/deletion) or knockins (via HDR). To create gene disruptions (Figure 1), a single guide RNA (sgRNA) is generated to direct the Cas9 nuclease to a specific genomic location. Cas9-induced double strand breaks are repaired via the NHEJ DNA repair pathway. The repair is error-prone, and thus insertions and deletions (INDELs) may be introduced that can disrupt gene function.

The principle of CRISPR/Cas9-mediated gene disruption. A single guide RNA (sgRNA), consisting of a crRNA sequence that is specific to the DNA target, and a tracrRNA sequence that interacts with the Cas9 protein (1), binds to a recombinant form of Cas9 protein that has DNA endonuclease activity (2). The resulting complex will cause target-specific double-stranded DNA cleavage (3). The cleavage site will be repaired by the nonhomologous end joining (NHEJ) DNA repair pathway, an error-prone process that may result in insertions/deletions (INDELs) that may disrupt gene function (4).

CRISPR/Cas9 technology has revolutionized genome editing, allowing a previously unattainable level of genomic targeting, efficiency, and simplicity. Guide-it products further improve the usability of the CRISPR/Cas9 system by providing a streamlined method for:

Types of Yeast Media

Figure 2. Classification of Complex Yeast Growth Media

Figure 3. Classification of Synthetic Yeast Growth Media

The minimal synthetic media can be used with drop-out medium supplements to create selective media for growing auxotrophic yeast cultures.

Furthermore, yeast strains can be sporulated using specific sporulation media. Indicator media can also be used to distinguish yeast strains that either ferment or do not ferment specific sugars, such as galactose or maltose.

An Introduction to Reactive Oxygen Species - Measurement of ROS in Cells

Reactive Oxygen Species (ROS) have long been known to be a component of the killing response of immune cells to microbial invasion. Recent evidence has shown that ROS play a key role as a messenger in normal cell signal transduction and cell cycling. These reactive molecules are formed by a number of different mechanisms and can be detected by various techniques. Here we briefly describe the biology behind some of these molecules and the means for their detection.


Reactive Oxygen Species (ROS) is a phrase used to describe a number of reactive molecules and free radicals derived from molecular oxygen. The production of oxygen based radicals is the bane to all aerobic species. These molecules, produced as byproducts during the mitochondrial electron transport of aerobic respiration or by oxidoreductase enzymes and metal catalyzed oxidation, have the potential to cause a number of deleterious events. It was originally thought that only phagocytic cells were responsible for ROS production as their part in host cell defense mechanisms. Recent work has demonstrated that ROS have a role in cell signaling, including apoptosis gene expression and the activation of cell signaling cascades [1]. It should be noted that ROS can serve as both intra- and intercellular messengers.

Types of Reactive Oxygen Species

Most reactive oxygen species are generated as by-products during mitochondrial electron transport. In addition ROS are formed as necessary intermediates of metal catalyzed oxidation reactions. Atomic oxygen has two unpaired electrons in separate orbits in its outer electron shell. This electron structure makes oxygen susceptible to radical formation. The sequential reduction of oxygen through the addition of electrons leads to the formation of a number of ROS including: superoxide hydrogen peroxide hydroxyl radical hydroxyl ion and nitric oxide. (Figure 1).

Figure 1. Electron structures of common reactive oxygen species. Each structure is provided with its name and chemical formula. The red &bull designates an unpaired electron.

Cellular Defense Against ROS

Detoxification of reactive oxygen species is paramount to the survival of all aerobic life forms. As such a number of defense mechanisms have evolved to meet this need and provide a balance between production and removal of ROS. An imbalance toward the pro-oxidative state is often referred to as &ldquoOxidative stress&rdquo.

Cells have a variety of defense mechanisms to ameliorate the harmful effects of ROS. Superoxide dismutase (SOD) catalyzes the conversion of two superoxide anions into a molecule of hydrogen peroxide (H2O2) and oxygen (O2) [3] (Eq. 1). In the peroxisomes of eukaryotic cells, the enzyme catalase converts H2O2 to water and oxygen, and thus completes the detoxification initiated by SOD (Eq. 2). Glutathione peroxidase is a group of enzymes containing selenium, which also catalyze the degradation of hydrogen peroxide, as well as organic peroxides to alcohols.

There are a number of non-enzymatic small molecule antioxidants that play a role in detoxification. Glutathione may be the most important intra-cellular defense against the deleterious effects of reactive oxygen species. This tripeptide (glutamyl-cysteinyl-glycine) provides an exposed sulphhydryl group, which serves as an abundant target for attack. Reactions with ROS molecules oxidize glutathione, but the reduced form is regenerated in a redox by an NADPH-dependent reductase. Vitamin C or ascorbic acid is a water soluble molecule capable of reducing ROS, while vitamin E (&alpha-tocopherol) is a lipid soluble molecule that has been suggested as playing a similar role in membranes.

The ratio of the oxidized form of glutathione (GSSG) and the reduced form (GSH) is a dynamic indicator of the oxidative stress of an organism [2].

Reaction to Oxidative Stress

The effect of reactive oxygen species on cellular processes is a function of the strength and duration of exposure, as well as the context of the exposure. The typical cellular response to stress is to leave the cell cycle and enter into G0. With continued exposure and/or high levels of ROS, apoptosis mechanisms are triggered. In cycling cells, p21 is activated in response to stress, such as oxidants or oxidative stress and blocks cell cycle progression [4]. Likewise p27 production leads to G1 arrest of cells. In cycling cells, p53 and p21 respond to oxidants by inducing the dephosphorylation of retinoblastoma (RB). Exposure to oxidants such as H2O2 or nitric oxide also results in dephosphorylation of RB that is independent of p53 or p21. In either case cells are arrested in S-phase. Expression of p27 is controlled in part by the Foxo transcription factors, which are known to control the expression of genes involved in cell cycle progression, metabolism and oxidative stress response [5]. For example, mitogenic stimulation by the PI3K/Akt pathway maintains Foxo3a in the cytoplasm, but in the absence of stimulation Foxo3a enters the nucleus and up- regulates genes for oxidant metabolism and cell cycle arrest, such as p27 [5]. Under some conditions Foxo3a can directly activate bim gene expression and promote apoptosis. [6]. Thus, Foxo3a promotes cell survival of cycling cells under oxidative stress by enabling a stress response, but induces cell death when conditions warrant. Noncycling cells, such as neurons, also have coping mechanisms to oxidative stress that involve Foxo3a. Foxo3a induces expression of the manganese form of SOD in response to oxidative stress [7].

Regulation of ROS Production

The stimulated production of reactive oxygen species by phagocytic cells was originally called &ldquothe respiratory burst&rdquo due to the increased consumption of oxygen by these cells [8]. This process is catalyzed by the action of NADPH oxidase, a multicomponent membrane bound enzyme complex, and is necessary for the bactericidal action of phagocytes [8].

While several enzymes are recognized as being able to produce ROS moieties, NADPH oxidase is the most significant [9]. NADPH oxidase activity is controlled by a complex regulatory system that involves the G-protein Rac [10] (Figure 2).

In resting cells a membrane embedded heterodimer of two polypeptides (p22-phox and gp91-phox), which also contains two heme groups as well as a FAD group, enables the transfer of electrons from cytosolic NADPH across the membrane to molecular oxygen without NADPH oxidase activity [9].

It is believed that the charge compensation occurs when gp91-phox polypeptide also acts as an H+ ion channel. Upon stimulation, a number of polypeptides (p47-phox, p67-phox and p40phox) translocates to the inner face of the plasma membrane to form a fully active enzyme complex that possesses NADPH oxidase activity. A similar process is believed to take place in non phagocytic cells as well [11].

Figure 2. Schematic illustration of the activation of NADPH Oxidase.

Reactive oxygen species have a role in a number of cellular processes. High levels of ROS, which can lead to cellular damage, oxidative stress and DNA damage, can elicit either cell survival or apoptosis mechanisms depending on severity and duration of exposure. Nitric oxide (&bullNO) has been shown to serve as a cell-to-cell messenger, being responsible for such effects as decreasing blood pressure [12]. Intra-cellularly, ROS species, in conjunction with antioxidant enzymes, are believed to play a role in turning enzymes on and off by redox signaling in a manner akin to that of the cAMP second messenger system [12]. Examples include superoxide anion, hydrogen peroxide. The steady state level of &bullO2 - is estimated to be so low, however that its activity is spatially limited. Hydrogen peroxide (H2O2) is normally unreactive with thiols in the absence of catalyzing agents (e.g. enzymes,&rdquo multivalent metals etc.), it does react with thiolate anion (S-), to form sulfenic acid, which in turn ionizes to form sulfenate (SO-). This intermediate can be reversed by the action of glutathione [13].

Mitogenic signaling begins at the cell surface with the ligand-dependent activation of receptor tyrosine kinases, which activate important MAP kinase cascades necessary for proliferation. These cascades lead to the generation of H2O2 from several enzyme catalysts, including the NADPH oxidases [14]. It has been estimated that the production of H2O2 at nanomolar levels is required for proliferation in response to growth factors [15]. Hydrogen peroxide interacts with both the SOS-Ras-Raf-ERK and PI3K/Akt pathways through several mechanisms and in a does-dependant manner (Figure 3). It has been suggested that small increases of H2O2, as a result of Nox1 expression result in increased reentry into the cell cycle, while sustained high levels of H2O2 lead to cell arrest and eventual apoptosis after prolonged arrest.

Peroxidoxins serve as important regulators of H2O2 and mitogenic signaling. These thiol-dependent peroxidases are activated and recruited to receptors as part of mitogenic stimulation and serve to limit the effect of ROS-associated stimulation on downstream targets of the mitogen cascade [16]. (Figure 3).

Cell Cycle Control: Redox Signaling

As cells proliferate, they move through a coordinated process of cell growth, DNA duplication and mitosis referred to as the cell cycle. The cell cycle is a tightly regulated process with several checkpoints. Each one of these checkpoints is regulated by proteins and protein complexes that are influenced by the oxidative state of the cell. The relationship between the Redox state and cell cycle control is described in great detail in a review by Heintz and Burhans [5].

In multi-cellular animals most of the cells are not replicating and have withdrawn from the cell cycle either temporarily or permanently via terminal differentiation. The exit of G0 and entry into G1 in response to extracellular growth factors is controlled by oxidants. Redox-dependent signaling pathways promote the expression of Cyclin D1 [17], the key protein for re-entry into the cell cycle. As such, cyclin D1 expression has been reported to be a marker for successful mitogenic stimulation [15]. The key regulatory point in G1 is the restriction point (or R point), where cells become committed to entry into S-phase. At the R point, the retinoblastoma (pRB) protein becomes phosphorylated by Cyclin D/CDK complexes. Interestingly enough studies have shown that there is a redox potential of approximately -207 mV for pRB phosphorylation, above which cells pRB is dephosphorylated and cells cease cycling [18]. It has been noted that in synchronized cells the production of ROS increases during the cell cycle, with peak levels occurring in the G2/M phase [19].

Reactive oxygen species play a role in apoptosis. NF-kB, which is a collective term to describe the Rel family of transcription factors, inhibits apoptosis by upregulating several antiapoptotic genes [17]. Conversely, the c-Jun N-terminal kinase (JNK) promotes apoptosis when activated for prolonged periods [20]. Prolonged activation has been shown to be caused by exposure to ROS directly as well as by inactivating JNK inhibitors such as MAP Kinase phosphatases [20]. Suppression of TNF-&alpha-induced ROS accumulation seems to be the mechanism by which NF-kB downregulates JNK activation.

Figure 3. Schematic Illustration of Reported Interactions of ROS and Mitogenic Cascades.

Measuring Reactive Oxygen Species

The measurement of reactive oxygen species is dependent on the analytic target along with the reactive oxygen species in question. At the cellular level, specific ROS can be individually assessed from tissue culture, while at the animal level typically the effects of oxidative stress are measured from blood product (e.g. serum or plasma) or from urine samples.

Glutathione is the most significant non enzymatic oxidant defense mechanism. It exists in relatively large amounts (mM levels) and serves to detoxify peroxides and regenerate a number of important antioxidants (e.g. &alpha-tocopherol and ascorbic acid) [21].

Reduced glutathione (GSH) is regenerated from its oxidized form (GSSG) by the action of an NADPH dependent reductase (Eq. 3).

Eq. 3. GSSG + NADPH + H+ &rarr 2 GSH + NADP+

Due to the rapid nature of the reduction of GSSG relative to its synthesis or secretion, the ratio of GSH to GSSG is a good indicator of oxidative stress within cells. GSH and GSSG levels can be determined by HPLC [22], capillary electrophoresis [23], or biochemically in microplates [24].

Several different assays have been designed to measure glutathione in samples. By using a luciferin derivative in conjunction with glutathione S-transferase enzyme the amount of GSH would be proportional to the luminescent signal generated when luciferase is added in a subsequent step [25]. Total glutathione can be determined colorimetrically by reacting GSH with DTNB (Ellman&rsquos reagent) in the presence of glutathione reductase. Glutathione reductase reduces GSSG to GSH, which then reacts with DTNB to produce a yellow colored 5-thio-2-nitrobenzoic acid (TNB), which absorbs at 412 nm.

Subcellular detection and localization of GSH is important in understanding the modulation of cellular redox status, the effect of drugs, and the mechanisms of detoxification. Furthermore, differences in GSH levels in response to oxidative stress in subpopulations of cells have been reported, underscoring the importance of detection methods amenable to flow cytometry and automated fluorescence detection.

The bimane compounds monobromobimane and monochlorobimane, which are essentially nonfluorescent until conjugated, readily react with low molecular weight thiols, including glutathione to form fluorescent adducts with an excitation wavelength of 394 nm and an emission at 490 nm [26] (Figure 4). These reagents are useful for detecting the distribution of protein thiols in cells before and after chemical reduction of disulfides. Monochlorobimane, which is more thiol selective than monobromobimane, has long been the preferred thiol-reactive probe for quantitating glutathione levels in cells and for measuring GST activity [27]. Because the blue-fluorescent glutathione adduct of monochlorobimane eventually accumulates in the nucleus, it is not a reliable indicator of the nuclear and cytoplasmic distribution of cellular glutathione [28].

Figure 4. Bimane structure and reaction with thiols. Monobromobimane and monochlorobimane have either a Br or a Cl atom located at the 3-postion methyl group respectively and is nonfluorescent. This reactive group interacts with low molecular weight thiols to form fluorescent adducts, with an excitation maxima of 394 nm and an emission wavelength of 490 nm.

ThiolTracker&trade Violet (Life Technologies) reacts with reduced thiols in intact cells for use in cellular analysis using flow cytometry and fluorescence microscopy. ThiolTracker&trade Violet reagent can cross live cell membranes, becoming cellimpermeant after reacting with cellular thiols. Its 404 nm excitation and 526 nm emission wavelengths are suitable for imaging with DAPI filter sets. It is reported to be 10 times as bright as bimane compounds by its manufacturer.

Lipid peroxidation is one of the most widely used indicators of free radical formation, a key indicator of oxidative stress. Unsaturated fatty acids such as those present in cellular membranes are a common target for free radicals. Reactions typically occur as a chain reaction where a free radical will capture a hydrogen moiety from an unsaturated carbon to form water. This leaves an unpaired electron on the fatty acid that is then capable of capturing oxygen, forming a peroxy radical (Figure 5). Lipid peroxides are unstable and decompose to form a complex series of compounds, which include reactive carbonyl compounds, such as malondialdehyde (MDA).

Figure 5. Illustration of lipid peroxidation.

Measurement of lipid peroxidation has historically relied on the detection of thiobarbituric acid (TBA) reactive compounds such as malondialdehyde generated from the decomposition of lipid peroxidation products [25]. While this method is controversial in that it is quite sensitive, but not necessarily specific to MDA, it remains the most widely used means to determine lipid peroxidation. This reaction, which takes place under acidic conditions at 90-100 ºC, results in an adduct that can be measured colorimetrically at 532 nm or by fluorescence using a 530 nm excitation wavelength and a 550 nm emission wavelength [29] (Figure 6). A number of commercial assay kits are available for this assay using absorbance or fluorescence detection technologies.

Figure 6. MDA-TBA adduct formation.

The formation of F2-like prostanoid derivatives of arachidonic acid, termed F2-isoprostanes (IsoP) has been shown to be specific for lipid peroxidation [30]. Unlike the TBA assay, measurement of IsoP appears to be specific to lipid peroxides, they are stable and are not produced by any enzymatic pathway making interpretation easier.

There have been a number of commercial ELISA kits developed for IsoPs, but interfering agents in samples requires partial purification of samples prior to running the assay. The only reliable means for detection is through the use of GC/ MS, which makes it expensive and limits throughput [31].

Lipid peroxidation in live cells can be visualized using fluorescent derivatives that localize to membranes. For example, oxidation of the poly unsaturated butadienyl portion of BODIPY® 581&frasl591 undecanoic acid fluorophore results in a shift of the fluorescence emission from 590 nm to 510 nm [32, 33] (Figure 7). This reagent commercially available as Image-iT® Lipid Peroxidation Kit (Life Technologies) provides a simple ratiometric method for detecting the oxidative degradation of cellular lipids in live cells [34]. The ratio of red fluorescence to green fluorescence provides a measure of lipid peroxidation that is independent of factors such as lipid density that may influence measurement with singleemission probes. Because this reagent is compatible with live cells, measurements can take place in real time without fixation and staining. This reagent has also been used for demonstrating the antioxidant capacity of plasma [35] and lipid vesicles [36].

Figure 7. Structure of C11-BODIPY (581/591).

Lipid peroxidation derived protein modifications in fixed cells can be detected using linoleamide alkyne (LAA) in conjunction with Click-iT® chemistry (Life Technologies). Linoleic acid is the most abundant polyunsaturated fatty acid found in mammals and its lipid peroxidation products likely account for the majority of lipid-derived protein carbonyls [37]. When incubated with live cells, LAA incorporates into cellular membranes. Upon lipid peroxidation, the membrane-bound LAA is oxidized and produces 9- and 13-hydroperoxy-octadecadienoic acid (HPODE). These hydroperoxides decompose to &alpha,&beta-unsaturated aldehydes that readily modify proteins surrounding them. Once cells are fixed, the resulting alkyne-containing proteins can be detected by reacting with Alexa Fluor® 488 azide (Figure 8).

Figure 8. Mechansim of Action of Click-iT® LAA.

Superoxide detection is based on the interaction of superoxide with some other compound to create a measurable result. The reduction of ferricytochrome c to ferrocytochrome c has been used in a number of situations to assess the rate of superoxide formation [38]. (Eq 4)

While not completely specific for superoxide this reaction can be monitored colorimetrically at 550 nm. The addition of enzyme inhibitors such as CN- or scavengers of reactive species such as catalase can minimize any reoxidation. Aconitase catalyzes the conversion of citrate to isocitrate. Superoxide inactivates this enzyme by oxidizing the Fe(II) moiety from its cubane <4Fe-4S>cluster. Thus superoxide concentrations can be estimated by the degree of enzyme inactivation. The activity of the enzyme can be monitored by following the conversion of 20 mM isocitrate to cicaconitate using absorbance at 240 nm. A coupled assay where the aconitase product, isocitrate is then converted to &alpha-ketoglutarate by NADP+ dependent isocitrate dehydrogenase can also be used. In this reaction the production of NADPH can be monitored colorimetrically at 340 nm [21].

Chemiluminescent reactions have been used for their potential increase in sensitivity over absorbance-based detection methods. The most widely used chemiluminescent substrate is Lucigenin, but this compound has a propensity for redox cycling, which has raised doubts about its use in determining quantitative rates of superoxide production [39]. The use of low concentrations of this compound has been suggested as a means to minimize this problem. Coelenterazine has also been used as a chemiluminescent substrate. This lypophilic compound does not redox cycle and is brighter than Lucigenin. It is not however completely specific towards superoxide, as the presence of peroxynitrite will result in chemiluminescence [40].

Hydrocyanine dyes are fluorogenic sensors for superoxide and hydroxyl radical. These dyes are synthesized by reducing the iminium cation of the cyanine (Cy) dyes with sodium borohydride. While weakly fluorescent, upon oxidation their fluorescence intensity increases 100 fold. In addition to being fluorescent, oxidation also converts the molecule from being membrane permeable to an ionic impermeable moiety [41]. The most characterized of these probes are Hydro- Cy3 and Hydro-Cy5.

Cellular production of superoxide can be visualized by dihydroethidium, also referred to as hydroethidine. This compound exhibits a blue fluorescence in the cytosol until oxidized primarily by superoxide and to a much lesser extent other reactive oxygen or reactive nitrogen species. Oxidation of dihydroethidium results in hydroxylation at the 2-position forming 2-hydroxyethidium (Figure 9). With oxidation the compound intercalated with cellular DNA, staining the nucleus a bright fluorescent red with reported excitation and emission wavelengths of 535 nm and 635 nm respectively [42].

Figure 9. Oxidation of Dihydroethidium to 2-Hydroxyethidium by Superoxide.

Superoxide specific to the mitochondria can be visualized using fluorescence microscopy with MitoSOX&trade Red reagent (Life Technologies). MitoSOX&trade Red reagent is a cationic derivative of dihydroethidium that permeates live cells where it selectively targets mitochondria. The cationic triphenylphosphonium substituent of MitoSOX Red indicator is responsible for the electrophoretically driven uptake of the probe in actively respiring mitochondria (Figure 10). As with dihydroethidium, this compound intercalates with mitochondrial DNA resulting in red fluorescence. While fluorescence measurements can be made using the peak excitation wavelength of 510 nm with an emission detection at 590 nm, it has been reported that a lesser excitation peak at

400 nm that is absent in the excitation spectrum of the ethidium oxidation product generated by reactive oxygen species other than superoxide may provide better discrimination of superoxide [42].

Figure 10. Structure of Oxidized MitoSox&trade Red mitochondrial superoxide indicator.

The generation of mitochondrial reactive oxygen species can be observed by imaging MitoSOX&trade stained cells. As an example, the non-steroidal anti-inflammatory drug Diclofenac has been associated with hepatotoxicity through the induction of reactive oxygen species [43]. Mitochondrial oxidative stress was confirmed using the MitoSOX assay following a three log titration of diclofenac dosing of liver microtissue over three days, a significantly increased signal from the red fluorescent probe was seen only in the highest does (300 &muM), suggesting that once a threshold does is reached elevated superoxide levels can no longer be neutralized (Figure 11).

Figure 11. Mitochondrial Oxidative Stress Assessment Following a Three Day Diclofenac Dosing. Overlaid images of 3D liver microtissues, stained with Hoechst 33342 (blue) and MitoSOX&trade Red (red) captured using the DAPI or RFP Cytation 3 imaging channels, respectively. Autofocus performed on DAPI stained cells [44].

The CellROX® reagents are a series of proprietary reagents from Life Technologies. These cell-permeant dyes are weakly fluorescent while in a reduced state and exhibits photostable fluorescence upon oxidation by reactive oxygen species (ROS). CellROX® green only becomes fluorescent with subsequent binding to DNA, limiting its presence to the nucleus or mitochondria. This compound has an excitation wavelength of 485 nm and an emission wavelength of 520 nm, making it amenable for imaging using the Green GFP filter sets. This reagent can be formaldehyde-fixed and its signal survives detergent treatment, allowing it to be it multiplexed with other compatible dyes and antibodies. CellROX® Orange and CellROX® Deep Red do not require DNA binding for fluorescence and are localized in the cytoplasm. CellROX® orange has an excitation wavelength of 545 and an emission of 565 and can be imaged with a RFP filter cube, while CellROX® Deep Red has an excitation peak of 640 nm and an emission peak of 665 nm and can be imaged with a CY5 cube.

Hydrogen peroxide (H2O2) is the most important ROS in regards to mitogenic stimulation or cell cycle regulation. There are a number of fluorogenic substrates, which serve as hydrogen donors that have been used in conjunction with horseradish peroxidase (HRP) enzyme to produce intensely fluorescent products [21]. While the list is quite extensive, the more commonly used substrates include diacetyldichloro-fluorescein [45], homovanillic acid [46], and Amplex® Red [47]. In these examples, increasing amounts of H2O2 form increasing amounts of fluorescent product. For example, Amplex Red is oxidized by hydrogen peroxide in the presence of HRP and in doing so converted to resorufin [47]. Unlike Amplex Red, resorufin is a highly colored compound that can be detected colorimetrically at 570 nm or by fluorescence using excitation of 570 nm and emission of 585 nm [48] (Figure 12).

Figure 12. Conversion of Amplex Red to resorufin by HRP using H2O2.

Homovannilic acid dimerizes when oxidized by hydrogen peroxide through horseradish peroxidase catalysis. As with Amplex red, homovanillic acid monomer is non-fluorescent, but as a dimmer, it possesses a peak excitation wavelength of 315 nm, with an emission wavelength of 425 nm (Figure 13). Care should be taken when using this compound to assess hydrogen peroxide production. The near UV nature of the excitation and emission wavelengths for fluorescence measurements make this compound prone to inordinate background signal, particularly when polystyrene microplates are used. Several peroxidase-like metalloporphoryns have been shown to be catalytic for the reaction in addition to HRP [49].

Figure 13. Dimerization of homovanillic acid by the action of HRP and hydrogen peroxide.

A number of colorimetric substrates such as tetramethylbenzidine (TMB) and phenol red have also been used in conjunction with HRP to measure hydrogen peroxide concentrations. In general colorimetric means are less sensitive than fluorescent detection methods, but instrumentation costs are significantly lower than those required for fluorescence based measurements when using tube based or microplate based detection methodologies.

There are a number of issues that one should be aware of when using HRP catalyzed substrates to quantitate hydrogen peroxide. Cellular compounds such as thiols can serve as a substrate for HRP. Endogenous catalase activity can artificially reduce the amount of H2O2 present. Cellular components can affect the fluorescent signal depending on the excitation and emission wavelengths, as with homovanillic dimer, while other wavelengths may suffer from signal quenching.

Tarpley et. al. summarized the utility of HRP-linked assays quite succinctly by stating that the method(s) are quite useful for the quantification of H2O2- levels &ldquo&hellip cultured cells, organ cultures and isolated buffer perfused tissue preparations. However these methods are not suitable for determinations of H2O2 in plasma, or serum because many reducing agents are present in extracellular fluid&hellip&rdquo[21].

The oxidation of 2&rsquo-7&rsquo dichlorofluorescin (H2DCF) to 2&rsquo-7&rsquodichlorofluorescein (DCF) has been used quite extensively for the quantitation of H2O2. The diacetate form, H2DCFDA and its acetomethyl ester H2DCFDA-AM are taken up by cells where non specific cellular esterases act upon it to cleave off the lipophilic groups, resulting in a charged compound believed to be trapped inside the cell. Oxidation of H2DCF by ROS converts the molecule to 2&rsquo, 7&rsquo dichlorodihydrofluorescein (DCF), which is highly fluorescent (Figure 14). The reported wavelengths for the measurement of DCF fluorescence are 498 nm for excitation and 522 nm for emission.

Figure 14. Formation of fluorescent Compound DCF by ROS.

Originally, DCF was thought to be specific for hydrogen peroxide, but recent evidence has shown that other ROS such as nitrate and hypochlorous acid can oxidize H2DCF [66]. Most importantly is the fact that H2O2-dependent oxidation of H2DCF requires ferrous iron [50]. In addition, as H2DCF is no longer ionic it is not precluded from migrating out of the cell and accumulating in the media, where it is free to interact with oxidants. In addition to PMT based fluorescence measurements, oxidized DCF fluorescence can be imaged using FITC or GFP filter sets. For example, the cytotoxic quinoline alkaloid camptothecin, which inhibits DNA topoisomerase I, causes oxidative stress with cultured primary hepatocytes [51]. As demonstrated in Figure 15, micromolar concentrations of camptothecin typically induce ROS production in about 10-20% of the cells in the field of view.

Figure 15. Oxidized DCF fluorescence in hepatocytes. Images of cultured hepatocytes captured after 0 and 30 minute treatments with 800 nM camptothecin. Cell nuclei were stained with Hoechst 33342 (blue), mitochondria were stained with MitoTracker® Red (Red) and oxidized DCF reagent is visualized in green [68]. Images were captured using Cytation&trade 3 Imaging multimode microplate reader (BioTek Instruments) using a 20x objective.

In order to address the weaknesses of DCF fluorescence several new fluorescent probes have been developed. Two such probes are Peroxy Green 1 (PG1) and Peroxy Crimson 1 (PC1). These boronate-based H2O2 probes have been reported to have high selectivity, membrane permeability, along with visible-wavelength excitation and emission wavelengths [50]. Reacting with hydrogen peroxide, results in a 10-fold and 40-fold increase in fluorescence for PG1 and PC1, respectively. PG1 features an excitation wavelength of 460 nm with emission maxima at 510 nm (Figure 16). PC1 demonstrates improved characteristics of red-shifted excitation and larger stokes shift which reduces autofluorescence (excitation: 480 nm emission: 584 nm) [52].

Figure 16. Structure of Peroxy Green 1 and Peroxy Crimson 1.

These molecules exhibit a direct reaction with hydrogen peroxide not observed with H2DCF. In addition these molecules are unreactive towards high-valent metal-oxo species derived from heme-proteins and H2O2. DCFH normally exhibits a greater response to this combination than it does towards H2O2.

Calcein-acetoxymethylester (Calcein-AM) has also been reported as a detector to intracellular oxidative activity [53]. Calcein-AM is a fluorogenic cell permeable compound that is converted by intracellular esterases into the cell impermeant anion calcein, which is fluorescent (Figure 17). Historically intracellular calcein production has been used in both microscopy and fluorometery as an indicator of viable cells. In regards to the detection of ROS, the kinetics of ROS reaction are favorable relative to esterease conversion to calcein.

The ROS-oxidized product of Calcein AM has been shown to be chemically distinct from Calcein-AM through thin layer chromatography [53], but it still retains the ability to cross cell membranes and has similar spectral properties to the fluorescent calcein. Thus it is important to keep the compound in the media rather than washing it away after cell loading, which is typically performed when using the compound for cell viability. Removal of the dye results in movement of the reacted compound back out of the cell on a concentration gradient. The physical properties of Calcein AM are also different from either Calcein-AM or Calcein as the dye tends to aggregate and form intensely fluorescent localizations within the cell. While this dye has possibilities with confocal microscopy where cellular localization is possible, the inability to distinguish spectrally between ROS reacted calcein-AM and the esterase reacted product makes the use of this dye in microplates problematic.

Figure 17. Calcein-AM structure.

The free radical nitric oxide (&bullNO) is produced by a number of different cell types with a variety of biological functions. Nitric oxide is a product of the oxidation of L-arginine to L-citrulline in a two step process catalyzed by the enzyme nitric oxide synthase (NOS). Two major isoforms of nitric oxide synthase have been identified. The constitutive isoform found in neurons and endothelial cells, produces very low amounts of nitric oxide in a calcium- and calmodulin-dependent fashion. &bullNO activates soluble guanlyate cyclase in target cells, resulting in increased levels of cGMP, which in turn facilitates neuronal transmission and vascular relaxation, and inhibits platelet aggregation [54].

The inducible isoform, found in macrophages, fibroblasts, and hepatocytes, produces &bullNO in relatively large amounts in response to inflammatory or mitogenic stimuli and acts in a host defensive role through its oxidative toxicity [55]. Regardless of the source or role, the free radical &bullNO has a very short half life (t½= 4 seconds), reacting with several different molecules normally present to form either nitrate (NO3 -) or nitrite (NO2 -)

A commonly used method for the indirect determination of &bullNO is the determination of its composition products nitrate and nitrite colorimetrically. This reaction requires that nitrate (NO3) first be reduced to nitrite (NO2), typically by the action of nitrate reductase (Figure 18).

Figure 18. Conversion of nitrate to nitrite by the action of Nitrate Reductase.

Subsequent determination of nitrite by a two step process (Figure 19) provides information on the &ldquototal&rdquo of nitrate and nitrite. In the presence of hydrogen ions nitrite forms nitrous acid, which reacts with sulfanilamide to produce a diazonium ion. This then coupled to N-(1-napthyl) ethylenediamine to form the chromophore which absorbs at 543 nm [56].

Nitrite only determinations can then be made in a parallel assay where the samples were not reduced prior to the colorimetric assay. Actual nitrate levels are then calculated by the subtraction of nitrite levels from the total. This assay is relatively inexpensive and easy to perform. The reagents are easily obtained and there are numerous commercial kits available for this assay.

Figure 19. Greiss reaction for the determination of nitrate.

In order to improve upon the sensitivity of the Griess reagent assay for &bullNO a number of fluorometric assays have been developed. Like the Griess reaction they are dependent on dinitrogen trioxide or nitrous acid (N2O3), which is formed spontaneously by the acidification of nitrite (NO2 -). The most commonly used method employs 2, 3-diaminonaphthalene (DAN), which is relatively nonfluorescent, to react with nitrous acid to form 2, 3 naphthotriazole (NAT), which is highly fluorescent with an excitation wavelength of 375 nm and an emission wavelength of 415 nm (Figure 20).

Figure 20. Fluorometric detection of nitrite using 2, 3-diaminonaphthalene (DAN).

Genetically Encoded Sensors

Fluorescent protein-based biosensors have been developed for the investigation of the ROS in situ in real time. This new generation of live cell fluorescent sensors produces changes in fluorescence in response to alteration in the redox state or with fluctuations in specific target analyte. These sensors are genetically encoded, based on a single fluorescent protein and do not require the addition of any other reagents or cell lysis, making them very amenable to multiplexing.

The reduction-oxidation sensitive green fluorescent protein (roGFP) is an example of a redox sensitive biosensor. Two cysteines were introduced into the surface exposed residues of the &beta barrel structure in appropriate positions to form disulfide bonds of the GFP protein from Aequorea victoria. The oxidation state of the engineered thiols determines the fluorescence properties of the sensor [57]. Originally, different roGFP versions were presented to allow the in vivo imaging of reducing compartments such as the cytosol (roGFP2) in plants [58], with cysteines introduced at the amino acid positions 147 and 204 being found to produce the greatest change [59]. The specificity of roGFP2 for glutathione is further increased by linking it to the human glutaredoxin 1 (Grx1) [60]. Glutaredoxins are small enzymes that are oxidized by substrates and reduced non-enzymatically by glutathione. By expressing the Grx1-roGFP fusion sensors in the organism of interest and/or targeting the protein to a cellular compartment, it is possible to measure the glutathione redox potential in a specific cellular compartment in real-time, which is a significant advantage over invasive static methods. Note that this probe does not directly measure ROS compounds. It does however detect the shift in oxidized/reduced (GSH/GSSG) glutathione equilibrium. In regards to detection, roGFPs have two fluorescence excitation maxima at about 400 and 490 nm with a common 515 emission which display rapid and reversible ratiometric changes in fluorescence in response to alterations in redox potential in vitro and in vivo. Disulfide formation results in the protonation of GFP with increases 405 excitation signals at the expense of 488 nm excitation signals when the emission output at 510 nm is determined. Thus the ratio of fluorescence from excitation at 405 and 488 nm indicate the extent of oxidation. Because this measurement is ratiometric, variations in biosensor levels or matrix induced optical sensitivity is corrected for.

Figure 21. Principle of ratiometric redox-sensitive GFPs. The relative fluorescence intensity of the two excitation maxima of roGFPs shifts depending on the redox state: reduction causes a decrease in the excitation at 400 nm and an increase in the excitation at 480 nm (arrows). From [61].

In order to directly sense H2O2 the roGFP construct has been linked to peroxidase Orp1, a yeast protein that forms disulfides upon reaction with H2O2, which are transferred to roGFP through a thiol-disulfide exchange mechanism [62]. The reaction is reversible through the action of cellular thioredoxin (Trx) or GRx/GSH systems. These probes are also available as BacMam 2.0 constructs under the Premo&trade moniker (Life Technologies) to allow easy transfection.

Another method to sense H2O2 directly is to conjugate circularly permuted fluorescent proteins with redox-reactive protein domains, such that conformational changes brought about by redox activity are translated to the fluorescent protein. One such chimera, called HyPer, was designed in the laboratory of Sergey A. Lukyanov [63]. HyPer consists of a circularly permuted yellow fluorescent protein (cpYFP) inserted into the regulatory domain of the prokaryotic H2O2- sensing protein, OxyR [64, 65]. HyPer2, an improved version of the probe, was generated by a single point mutation A406V from HyPer corresponding to A233V in wild type OxyR [64]. Unlike the roGFP-Orp1 chimera, there is no transfer thiol-disulfide transfer, but rather two cysteines of OxyR form a reversible disulfide bond which induces a conformational change that is transferred to the cpYFP moiety [65]. HyPer demonstrates submicromolar affinity to hydrogen peroxide and has been shown to be insensitive to other oxidants, such as superoxide, oxidized glutathione, nitric oxide, and peroxinitrite.

Genetically encoded sensors can be targeted to specific cellular compartments by utilizing cellular trafficking sequences as part of the chimeric molecule. For example peptides can be targeted to the nucleus by inserting repeats of the nuclear localization signal (NLS), which consists of short sequences of positively charged lysines and arginines exposed on the protein surface. These sequences are recognized by cellular proteins (importin &alpha and importin &beta), which mediate its transport into the nuclease. Similar sequences can be used to direct ROS sensors to mitochondria, peroxisomes or the cytoplasm.


The interest in reactive oxygen species originally revolved around the pathology associated with the deleterious effects of aerobic respiration: the necessary evil caused by the leakage from the electron transport chain in mitochondria. In this context, research involved the role that these agents played in aging, chronic diseases and cancer.

A new frontier was born with the discovery that the &ldquooxidative burst&rdquo by phagocytic cells was actually the result of the intentional production of reactive oxygen species. This was thought to be a very specific application where specific cells produced what can only be described as toxic agents in order to kill invading microorganisms. Further recent work has shown that ROS are produced in all cell types and serve as important cellular messengers for both intra- and inter-cellular communications. It is now apparent that a very complex intra-cellular regulatory system involving ROS exists within cells. Cells respond to ROS moieties in different ways depending on the intensity, duration and context of the signaling. In regards to intracellular signaling it appears that hydrogen peroxide (H2O2) is the most interesting candidate, while nitric oxide (&bullNO) is involved primarily with intercellular signaling.

The chemistry used initially for the detection of ROS was primarily absorbance measurement based. Research generally involved the measurement of glutathione levels to assess oxidative stress at the tissue or whole body level. With millimolar levels of analyte absorbance based measurements where more than adequate to be informative and quantitative. With the discovery that ROS are used as intracellular messengers and regulators, new chemistries were developed with the micromolar detection requirements in mind. These agents are primarily fluorescence based, but recently luminescent based detections have been introduced.

The advent of image based analysis using either small molecule fluorescent sensors or genetically encoded sensors has provided new insights in regards to ROS research. Image analysis can provide not only quantitate information, but also cellular localization. This can be accomplished through either reporter design or image analysis. Chemical ROS reporters or genetically encoded ROS sensors have been designed with chemical structures or peptide sequences, respectively, that result in the localization of the detector to specific cellular organelles (e.g. nuclei, mitochondria, lysosomes, etc.). Therefore any changes in imagery can be directly associated with a specific cellular location. Alternatively, localization of ROS changes with reporters that are not organelle specific can be accomplished colocalization with non ROS related stains that are location specific. By overlaying separate color images cellular locations can be identified.

The biggest difficulty reported with much of the cellular ROS research has been with the lack of reporter agents specific for discrete molecules. ROS moieties by their nature are reactive with a number of different molecules as such designing reporter agents has been difficult. With more specific chemistries, particularly for hydrogen peroxide, the specific mechanisms for regulation will be elucidated.

Watch the video: Prokaryotic Vs. Eukaryotic Cells (May 2022).